YJ355FPC-V1 touch panel 10.1 inch YJ355FPC-V0 touch screen panel Glass

Product Overview

Model: YJ355FPC-V1 (Updated Version) / YJ355FPC-V0 (Original Version)

Size: 10.1 inch, Landscape

Touch Type: Projected Capacitive Touch Panel (PCAP, G+G Structure)

Application: General Android tablet, industrial all-in-one, portable equipment touch replacement

Compatibility: V0 and V1 share identical outline dimension; FPC pinout compatible for direct replacement in most devices

Delivery Content: Only touch digitizer glass (LCD display panel NOT included)

2. Basic Technical Specification Table

3. Version Difference Description

1. YJ355FPC-V0: Original old revision, stable stock for legacy tablet repair

2. YJ355FPC-V1: Optimized revised edition; improved EMC anti-interference, better touch stability under power noise

3. Mechanical outline, hole position, FPC length & pin definition are interchangeable; can replace each other directly without modification

4. Core Advantages

1. G+G glass structure provides rigid surface, superior durability compared to film-type touch

2. Built-in AF anti-fingerprint coating, suitable for daily continuous operation

3. Standard I2C communication, compatible with mainstream Goodix / FocalTech touch control IC

4. 10-point multi-touch, support gesture operation for Android embedded systems

5. Mass-produced universal replacement touch glass, widely used for aftermarket tablet repair

5. Typical Application Scenarios

1. 10.1-inch generic Chinese brand tablet touch screen replacement

2. Embedded industrial HMI, self-service terminal auxiliary touch upgrade

3. Educational learning machine, portable intelligent display equipment maintenance

4. Equipment refurbishment project for 10.1-inch capacitive touch assembly

6. Important Installation & Matching Reminders

1. This item is only touch digitizer glass, does not contain LCD display; confirm your original touch model number before ordering

2. FPC bending must be gentle; excessive bending will crack internal ITO circuit and cause touch failure

3. Adhesive tape is required for bonding; avoid residual glue contaminating ITO sensing area

4. Strictly confirm hole position (front camera cutout) matches original screen before installation

5. Power supply must maintain stable 3.3V; voltage fluctuation will trigger touch drift or dead zone

6. V0 and V1 are mechanically interchangeable, but individual device firmware may need simple verification after replacement

7. FAQ

Q1: Can YJ355FPC-V1 directly replace YJ355FPC-V0?

Q2: Does this product include LCD screen?

Q3: What communication interface does this touch panel adopt?

Q4: How many touch points are supported?

Q5: Is waterproof performance supported?