TX17D02VM2CPA is KOE’s cost-effective 6.5-inch VGA industrial TFT module derived from Hitachi industrial display technology, optimized for compact embedded control equipment, battery-powered portable testers and vehicle-mounted small display terminals.
Adopting TN liquid crystal with balanced horizontal and downward viewing angle, it maintains stable color reproduction for single-operator front operation scenes, avoiding obvious color washout and grayscale inversion under common workshop viewing postures. Classic 4:3 VGA resolution fully matches legacy industrial control software without UI compression, ideal for displaying multi-line parameter tables, equipment wiring diagrams and real-time running curves.
| Parameter | Technical Specification |
|---|---|
| Full Model | TX17D02VM2CPA |
| Manufacturer | KOE (Hitachi / JDI Group) |
| Diagonal Size | 6.5 inches |
| Native Resolution | 640(H) × 480(V) VGA, 4:3 Aspect Ratio, 122 PPI |
| LCD Technology | a-Si TN TFT-LCD, Transmissive, Normally White |
| Pixel Arrangement | RGB Vertical Stripe |
| Color Performance | 6-bit RGB, 262K display colors, 45% NTSC gamut |
| Signal Interface | Single-channel 6-bit LVDS, 20Pin FPC connector, 3.3V logic voltage |
| Backlight System | Edge-lit WLED, onboard integrated LED driver IC, PWM dimming pin reserved |
| Rated Backlight Lifespan | 50,000 hours typical |
| Typical Brightness | 480 cd/m² high industrial brightness |
| Typical Contrast Ratio | 600:1 |
| Viewing Angle (CR≥10, L/R/U/D) | 80° / 80° / 60° / 80°, Optimal viewing: 6 o’clock front lower |
| Total Response Time (Tr+Td) | 30 ms typical |
| Refresh Rate | 60 Hz standard |
| Pixel Pitch | 0.207 × 0.207 mm |
| Active Display Area (AA) | 132.48 mm (W) × 99.36 mm (H) |
| Overall Outline Dimension | 153.0 mm (W) × 118.0 mm (H) × 10.2 mm thickness |
| Net Weight | ~210 g lightweight compact module |
| Surface Treatment | Matte AG anti-glare polarizer, scratch-resistant coating |
| Operating Temperature Range | -20 ℃ ~ +70 ℃ wide industrial grade |
| Storage Temperature Range | -30 ℃ ~ +80 ℃ |
| Touch Panel | Bare LCD without integrated touch; 4-wire resistive touch film optional optical bonding |
| Vibration & Shock | 1.8G industrial reliability certification |
| Compliance Standard | RoHS Lead-Free Certified, mercury-free WLED backlight |
| Product Status | Mass production active industrial panel, A-grade original new stock available |
-20℃ ~ +70℃ wide temperature tolerance: Stable operation in cold storage, vehicle-mounted and fluctuating industrial cabinet environments
480 cd/m² high brightness: Visible under bright workshop and semi-outdoor ambient light
Integrated WLED drive circuit: No separate external LED driver board required, lower assembly cost
Compact 10.2mm slim thickness & lightweight 210g, fits narrow embedded control cavity
Standard single-channel LVDS interface, widely compatible with mature industrial control hardware
Mercury-free long-life WLED backlight, eco-friendly with low standby power consumption
Mature Hitachi/KOE industrial circuit design, stable for 24/7 continuous equipment operation
Compact factory automation HMI, small PLC production line monitoring control terminals
Portable industrial measuring, field maintenance diagnostic handheld instruments
Construction & agricultural machinery vehicle-mounted industrial control display screens
Light medical portable auxiliary monitoring and analytical instrument displays
Mini indoor self-service kiosks and logistics portable data recording terminals
Replacement spare screen for KOE/Hitachi TX17D series 6.5" VGA LVDS industrial TFT modules












