Recently Viewed
LQ070Y5DG11 Sharp 7"800(RGB)×480 a-Si TFT-LCD LCM
LQ070Y5DG11 is Sharp mature 7-inch WVGA industrial TFT module, favored by construction machinery, off-road vehicle and portable industrial equipment manufacturers.
400 cd/m² high brightness enables clear viewing under workshop and cabin ambient light without extra shading hood. Standard 800×480 WVGA resolution is widely adopted by legacy embedded HMI firmware, suitable for parameter menus, waveform data, monitoring graphics display without picture distortion.
| Category | Parameter | Standard Typical Value |
|---|---|---|
| Basic Info | Full Model | LQ070Y5DG11 |
| Manufacturer | Sharp Corporation (Japan) | |
| Screen Size | 7.0 inch, landscape 16:9 | |
| Native Resolution | 800(RGB) × 480 WVGA, 133 PPI | |
| Panel Tech | a-Si TN TFT-LCD, Transmissive Normally White | |
| Pixel Arrangement | RGB vertical stripe | |
| Optical Performance | Pixel Pitch | 0.066(W) × 0.198(H) mm |
| Active AA Display Area | 154.08(W) × 91.44(H) mm | |
| Typical Brightness | 400 cd/m² | |
| Contrast Ratio | 500:1 @ 25℃ ambient | |
| Color Depth | 6-bit per RGB channel, 262K colors, 48% NTSC gamut | |
| Viewing Angle (CR≥10) | L/R:70°, U:50°, D:60°; Optimal viewing: 6 o’clock | |
| Response Time (Tr+Td) | 35ms typical | |
| Mechanical Spec | Overall Outline Dimension | 165.0(W) × 104.0(H) × 6.4(D) mm |
| Net Weight | ~168g | |
| Surface Polarizer | Gloss hard coat; matte AG anti-glare film optional | |
| Electrical Interface | Connector | 40Pin 0.5mm pitch FPC parallel RGB TTL |
| Logic Supply Voltage | DC 3.3V (3.0V ~ 3.6V tolerance) | |
| Backlight System | Light Source | Edge side WLED array |
| Onboard Drive Circuit | No built-in WLED constant current IC; external LED driver required | |
| WLED Rated Lifespan | 50,000 hours to half brightness | |
| Environmental Rating | Operating Temperature | -20 ℃ ~ +70 ℃ industrial & vehicle grade |
| Storage Temperature | -30 ℃ ~ +80 ℃ | |
| Operating Humidity | 10% ~ 90% RH non-condensing | |
| Quality & Stock | Quality Grade | Original A+: zero bright/dark dot, no line defects, uniform backlight without leakage & color cast |
| Stock Status | In-Stock, full 4-hour temperature cycling aging + full pixel scan + signal stability test, inspection report attached per unit | |
| Compliance | Certification | RoHS Lead-Free Certified, mercury-free WLED backlight |
| Touch Matching | Touch Option | Bare LCD only; separate 7" 4-wire resistive touch digitizer for optical bonding |
-20℃ ~ +70℃ wide temperature, suitable for vehicle-mounted and field portable industrial equipment
400 cd/m² high brightness, readable under bright indoor and semi-open ambient environment
Classic 800×480 WVGA resolution, compatible with massive existing industrial control program
Sharp stable original industrial quality, low failure rate for equipment maintenance replacement
Standard 40Pin parallel RGB TTL interface, easy to match various embedded mainboards
Mercury-free long-life WLED backlight (50,000hrs), reduce maintenance frequency
Spot stock with fast delivery, each unit attached complete pre-shipment aging test report
Construction machinery, engineering vehicle cabin monitoring display replacement
Handheld industrial fault detector, portable environmental data logger main screen
Embedded industrial PLC HMI, small automated equipment control panel
Mini portable medical testing auxiliary display terminal
Replacement spare panel for Sharp LQ070Y5DG series 7-inch WVGA TFT modules
