Recently Viewed
TX14D10VM1BPA HITACHI 5.7 inch 640*480 lcd display screens
TX14D10VM1BPA adopts a 3S7P WLED edge-lit backlight system with built-in LED driver circuit, and the backlight life is up to 40,000 hours. The signal interface is a 20-pin single-channel 6-bit LVDS interface supporting 262K color display. It has a built-in 4-wire resistive touch screen (Film on Glass structure), and the surface is treated with anti-glare matte coating. With an overall thickness of only 13.1mm and a weight of about 200g, its ultra-thin and lightweight design makes it easy to integrate into industrial equipment with limited space. This model is still in mass production and is an ideal display solution for industrial control, medical equipment, automotive electronics and other fields.
TX14D10VM1BPA HITACHI lcd display screens Highlights:
High resolution display: 640×480 VGA resolution + 141PPI pixel density, delivering sharp and delicate images with clear text and graphics display
Built-in resistive touch screen: Integrated 4-wire resistive touch screen, no need to purchase and assemble touch components separately, simplifying system design and reducing costs
Built-in LED driver circuit: Integrated WLED backlight driver, only 3.3V and 12V dual power supplies required for normal operation, greatly simplifying power supply design
Wide temperature industrial design: Operating temperature range from -20°C to 70°C, adapting to various industrial environment temperature changes
COG high integration technology: Adopts Hitachi's COG chip-on-glass integration technology, small size, light weight and high reliability, suitable for embedded devices with limited space
TX14D10VM1BPA HITACHI lcd display screens Specification:
| Parameter | Specification |
|---|---|
| Part Number | TX14D10VM1BPA |
| Brand | Hitachi / KOE Co., Ltd. |
| Screen Size | 5.7 inch |
| Panel Type | a-Si TFT-LCD, Liquid Crystal Module (LCM) |
| Resolution | 640(RGB)×480 [VGA] |
| Pixel Density | 141 PPI |
| Pixel Format | RGB Vertical Stripe |
| Pixel Pitch | 0.180×0.180 (H×V) mm |
| Active Area | 115.2(W)×86.4(H) mm |
| Bezel Opening | 119.4(W)×90.6(H) mm |
| Brightness | 280 cd/m² (Typical) |
| Contrast Ratio | 350:1 (Typical, Transmissive) |
| Color Depth | 262K (6-bit) |
| Color Gamut | 50% NTSC (CIE1931) |
| Backlight Type | WLED, 3S7P, edge-lit, integrated driver |
| Backlight Life | 40,000 hours (Typical) |
| Interface Type | LVDS (1 ch, 6-bit), 20 pins JAE FI-SEB20P connector |
| Optical Mode | TN, Normally White, Transmissive |
| Best View Direction | 6 o'clock (No Image Inversion) / 12 o'clock (Contrast Peak) |
| Viewing Angle | 70°/70°/70°/70° (U/D/L/R, CR≥5) |
| Response Time | 45 ms (Tr+Td, Typical) |
| Refresh Rate | 60Hz |
| Input Voltage | 3.3V (LCD Logic) / 12V (Backlight) |
| Power Consumption | 479mW (LCD) / 1.0W (Backlight) |
| Operating Temperature | -20°C ~ +70°C |
| Storage Temperature | -30°C ~ +80°C |
| Vibration Rating | 2.0G (19.6 m/s², Non-operating) |
| Surface Treatment | Matte, anti-glare coating |
| Mechanical Dimensions | 131.0(W)×102.2(H)×13.1(D) mm (Typical) |
| Weight | Approximately 200g (Typical) |
| Production Status | Active |
| Touch Function | Built-in 4-wire resistive touch screen (Film on Glass) |
| RoHS Compliance | Yes |
TX14D10VM1BPA HITACHI lcd display screens Applications:
Industrial Automation: PLC HMI, industrial robot teach pendants, production line status displays, small instruments and meters
Medical Equipment: Portable medical instruments, medical monitoring devices, diagnostic equipment displays, laboratory analytical instruments
Automotive Electronics: In-vehicle navigation systems, in-vehicle entertainment terminals, special vehicle dashboards, construction machinery display terminals
Test and Measurement: Handheld multimeters, oscilloscopes, signal generators, data acquisition terminals
Other Applications: POS terminals, access control systems, smart home control panels, portable industrial terminals
FAQ:
Q1: Is the touch function of TX14D10VM1BPA built-in?
A1: Yes, this screen has a built-in 4-wire resistive touch screen (Film on Glass structure), no need to purchase and assemble touch components separately, plug and play.
Q2: Does this screen require an additional backlight driver board?
A2: No, TX14D10VM1BPA has a built-in WLED backlight driver circuit, only 12V DC power supply is required to power the backlight, simplifying system integration.
Q3: What is the interface type of this screen?
A3: TX14D10VM1BPA adopts a 20-pin single-channel 6-bit LVDS interface using JAE FI-SEB20P connector, an industry universal standard, compatible with most industrial control motherboards.
Q4: Is the product an original Hitachi genuine product?
A4: Yes, all TX14D10VM1BPA we sell are original genuine products manufactured by Hitachi/KOE, with 12 months warranty and perfect after-sales service.
