Recently Viewed
TM065JYHC03-00 Tianma 6.5 inch a-Si TFT-LCD CELL 720(RGB)×1560
TM065JYHC03-00 is mass-produced ultra-thin vertical bare TFT cell from Tianma, mainly supplied to secondary module manufacturers and equipment refurbishment factories.
Vertical 720×1560 high resolution delivers delicate display effect for vertical menu UI, measurement waveforms and industrial graphics, better than conventional low-resolution 6.5-inch vertical panels. Ultra-thin 0.4mm dual glass structure reduces total thickness after bonding polarizer and backlight, suitable for equipment with limited inner cavity space.
Full Technical Specification Table
| Category | Parameter | Typical Specification |
|---|---|---|
| Basic Info | Part Number | TM065JYHC03-00 |
| Manufacturer | Tianma Microelectronics | |
| Screen Size | 6.5 inch, vertical portrait | |
| Native Resolution | 720(RGB) × 1560, 264 PPI | |
| Form Type | a-Si TFT-LCD Bare Cell (No polarizer, No BL, No FPC) | |
| Display Mode | ADS TFT-LCD, Transmissive Normally Black | |
| Pixel Arrangement | RGB vertical stripe | |
| Optical Performance | Active Display Area (AA) | 69.12(W) × 149.76(H) mm |
| Bare Cell Outline | 71.12(W) × 154.76(H) × 0.4(D) mm ultra-thin glass | |
| Contrast Ratio | 1200:1 @ 25℃ (with standard matched polarizer) | |
| Color Depth | 8-bit RGB, 16.7M true color, 70% NTSC | |
| Viewing Angle (CR≥10) | L/R/U/D: 80°/80°/80°/80°, symmetrical wide view | |
| Response Time (Tr+Td) | 30ms typical | |
| Refresh Rate | 60Hz native | |
| Transmittance | 5.0% typical (with APCF polarizer) | |
| Mechanical Spec | Net Weight | ~41g bare glass |
| Glass Structure | Upper 0.2mm + Lower 0.2mm, total thickness 0.4mm | |
| Electrical Interface | Target Interface after bonding | 4-lane MIPI DSI |
| Supply Voltage | IOVDD 1.8V / AVDD 2.8V low power design | |
| Backlight System | Built-in Backlight | Not included; separate edge WLED backlight required |
| Environmental Rating | Operating Temperature | -20 ℃ ~ +70 ℃ portable industrial grade |
| Storage Temperature | -30 ℃ ~ +80 ℃ | |
| Operating Humidity | 10% ~ 90% RH non-condensing | |
| Quality & Stock | Quality Grade | New Original Grade A bare cell: zero bright/dark dot, no line mura, consistent optical uniformity |
| Stock Status | In-Stock; full pixel scan and transmittance inspection before shipment | |
| Compliance | RoHS Lead-Free Certified | |
| Matching Accessories (Sold Separately) | Front/rear polarizer, edge WLED backlight, MIPI COF FPC driver, PCAP capacitive / 4-wire resistive touch glass |
Vertical portrait 720×1560 high resolution, optimized for handheld vertical UI layout
ADS symmetrical 80° four-side wide viewing angle, less color shift than TN bare cell
Ultra-thin 0.4mm total glass thickness, lightweight 41g bare cell for slim finished module assembly
Wide operating temperature -20℃ ~ +70℃, stable startup in semi-outdoor portable scenarios
Low power dual-voltage driver architecture, suitable for battery-powered portable equipment
Highly customizable: polarizer, backlight brightness and touch scheme can be freely matched
Mature Tianma TFT glass production process, low mura and defect rate for mass assembly
Ready new original bare cell stock; batch optical inspection report available upon request
Custom vertical display assembly for handheld industrial fault diagnostic testers
Custom LCM raw material for smart home wall-mounted vertical control panels
Mini portable blood analysis, ECG handheld medical measuring equipment display
Wearable industrial remote controller and portable data acquisition terminal screen
Refurbishment replacement bare cell for legacy 6.5-inch vertical handheld instruments
Raw glass supply for secondary TFT LCD module bonding factories
