Recently Viewed
P0570VGF1ME00 TIANMA 5.7 inch 640×480 tft lcd module
Model: P0570VGF1ME00
Manufacturer: TIANMA Microelectronics (P-series industrial display)
Size: 5.7 inch, Landscape 4:3
Native Resolution: 640(RGB)×480 VGA
Display Technology: a-Si TFT-LCD SFT Wide View, Normally Black Transmissive
Signal Interface: 40Pin 18-bit Parallel RGB TTL
Backlight: Edge-lit WLED. No onboard LED constant current driver, external LED driver required
Touch Configuration: Bare LCD module without touch sensor
Compatible Variant: P0570VGF1MA00 (1000cd/㎡ high brightness version)
| Classification | Standard Parameter |
|---|---|
| Basic Display Spec | Diagonal: 5.7"Resolution: 640 × 480 VGAActive Area: 115.2(W) × 86.4(H) mmPixel Arrangement: Vertical RGB stripeDisplay Mode: SFT Normally Black |
| Mechanical Dimension | Outline: 127.2(W) × 100.4(H) × 5.8(D) mmSurface: Clear polarizer, AG anti-glare polarizer available on requestMetal frame with standard mounting holesNet Weight: ~185g |
| Optical Performance | Typical Brightness: 300 cd/m²Contrast Ratio: 1000:1 (Typ.)Viewing Angle(CR≥10): 88°/88°/88°/88° Four Symmetric Wide ViewColor Depth: 6bit, 262K colors, 65% NTSCResponse Time (Tr+Td): 35ms typicalRefresh Rate: 60Hz |
| Electrical Parameter | Logic Supply Voltage: DC 3.3VSignal Level: 3.3V CMOS TTLConnector: 40Pin FPC, 0.5mm pitchTypical LCD Power Consumption: ≈0.32W |
| Backlight System | Light Source: WLED (5S3P)LED Service Life: ≥50,000 hours (to half brightness)Control Signal: BL_EN + PWM dimming |
| Environmental Grade | Operating Temperature: -20 ℃ ~ +70 ℃ Wide Temperature Industrial GradeStorage Temperature: -30 ℃ ~ +80 ℃Humidity: 10%~90% RH, non-condensing |
| Certification | RoHS, CE |
Power pins: VDD 3.3V, multiple GND shielding pins
18-bit RGB parallel data bus
Timing signals: Hsync, Vsync, DOTCLK, DE(Data Enable)
LCD hardware reset pin (Active Low)
Backlight control pins: BL_EN, PWM brightness adjustment
Adopts Tianma SFT symmetric wide-view technology, consistent viewing performance from all directions with minimal color shift, superior to conventional TN panels
Wide temperature industrial specification (-20~+70℃), supports reliable startup under low-temperature environments
High contrast ratio 1000:1, delivering clear visualization for texts and graphics
Standard 18-bit RGB TTL interface, compatible with numerous legacy embedded industrial control mainboards and HMI controllers
Ultra-thin module thickness of only 5.8mm, ideal for embedded installation within limited space
Standardized Tianma P-series industrial LCD, stable supply for mass production and equipment maintenance replacement
Industrial HMI, CNC machine tools, injection molding machinery operation panels
Construction machinery, forklifts, agricultural machinery on-board display terminals
Portable test instruments and laboratory analytical equipment
Auxiliary medical monitoring equipment
Control terminals for automated production lines
Upgrade & replacement projects for 5.7-inch VGA industrial displays
Power Requirement: LCD panel requires stable DC3.3V supply; 5V power input is prohibited
Backlight Notice: No integrated constant current circuit. External dedicated WLED driver is required. CCFL high-voltage inverters cannot be used
Model Distinction: P0570VGF1ME00 (300nits indoor version) and P0570VGF1MA00 (1000nits high-bright version) share identical outline and pinout, differing only in brightness
Touch Customization: Standard product is bare LCD. 4-wire resistive or capacitive touch panel can be bonded via OCA upon customer request
FPC Cable Handling: Avoid sharp bending of 40Pin flexible cable to prevent screen flicker or partial blackout
Viewing Flexibility: SFT technology has no fixed preferred viewing direction for flexible assembly
FAQ
