NL3224BC35-22 NLT 5.5 inch a-Si TFT-LCD LCM 320(RGB)×240
NL3224BC35-22 NLT 5.5 inch a-Si TFT-LCD LCM 320(RGB)×240
Price: $130.00
$120.00/ piece
Add to cart
NL3224BC35-22 NLT
NL3224BC35-22 NLT

NL3224BC35-22 NLT 5.5 inch a-Si TFT-LCD LCM 320(RGB)×240

Price: $130.00
$120.00/ piece
Delivery:
Payment:
Calculate shipping price
Require:*
Product Model* Target price Qty *
Message
Your contact info: Additional info:
Name: *
Mr. Ms.
1. Quote with shipping freight?
Email : *
YES NO  
Phone: 2. Which carrier do you perfert?
Company:
Fedex UPS DHL
TNT other
Country:*

NL3224BC35-22 NLT 5.5 inch a-Si TFT-LCD LCM 320(RGB)×240

Product Information Product Specifications
Model:
NL3224BC35-22
Brand:
NLT
Application:
Industrial
Size:
5.5"
Resolution:
320(RGB)×240, QVGA 72PPI
Brightness:
750 cd/m² (Typ.)
Contrast Ratio:
500 : 1 (Typ.) (TM)
Viewing Angle:
55/55/50/40(Typ.)(CR≥10)
Lamp Type:
2 pcsCCFL, 40K hours, No Driver
Signal Interface:
CMOS(1ch,6-bit),33pinsConnector
Panel Type:
a-Si TFT-LCD, LCM
Pixel Format:
RGB Vertical Stripe
Active Area:
111.36(W)×83.52(H) mm
Bezel Opening:
117.9(W)×90.2(H) mm
Outline size:
134 × 104.5× 13 (H×V×D)
Surface:
Clear,Hardcoating(2H),Antireflection
Response Time:
-
Best View on:
12o'clock
Work Mode:
TN, Normally White, Transmissive
Display Colors:
262K50%NTSC
Weight:
215/225g(Typ./Max.)
Frequency:
60Hz
Touchscreen:
Without
Signal Type:
CMOS(1ch,6-bit),33pinsConnector
Voltage Supply:
3.3/5.0V(Typ.)(VCC)
Ordering instructions
Quality:
test ok before ship it
RMA Policy:
RMA 6 month
Sample:
Paid Sample
Stock:
300
Stock Location:
China
Delivery:
WorldWide
Lead Time:
1-3 Days
Weight:
0.500 KG
Overview

NL3224BC35-22 is a classic industrial 5.5-inch QVGA TFT LCD module manufactured by NLT Technologies (NEC Japan). Native resolution: 320(RGB)×240 QVGA, 4:3 landscape, ST-NLT TN transmissive normally white display, dual CCFL backlight, 33Pin single-channel 6-bit parallel CMOS RGB interface.

Interchangeable model: NL3224BC35-20; mechanical outline, mounting holes and pin definition are identical, only verify CCFL voltage & timing before replacement

Full Technical Specification Table

CategoryParameterTypical Specification
Basic InfoFull Part NumberNL3224BC35-22
ManufacturerNLT (NEC Display Japan)
Screen Size5.5 inch, landscape 4:3
Native Resolution320(RGB) × 240 QVGA, 72 PPI
Panel Technologya-Si ST-NLT TN TFT-LCD, Transmissive Normally White
Pixel ArrangementRGB vertical stripe
Optical PerformanceActive Display Area (AA)111.36(W) × 83.52(H) mm
Pixel Pitch0.348(W) × 0.348(H) mm
Typical Brightness750 cd/m² high industrial sunlight readable
Static Contrast Ratio500:1 @ 25℃ ambient
Color Depth6-bit RGB, total 262K display colors
Viewing Angle (CR≥10)L/R:55°, U:50°, D:40°; optimal viewing 12 o’clock
Response Time (Tr/Td)5ms / 25ms, total 30ms typical
Refresh Rate60Hz native, QVGA/VGA timing switchable
Mechanical SpecOverall Outline Dimension134.0(W) × 104.5(H) × 12.5(D) mm aluminum metal frame
Net Weight~215g lightweight industrial module
Surface TreatmentStandard glossy anti-reflection 2H hard coat; matte AG polarizer optional
Electrical InterfaceConnector33Pin 0.5mm pitch FPC single-channel 6-bit parallel CMOS RGB
Logic Supply VoltageDC 3.3V (3.0V ~ 3.6V tolerance)
Backlight SystemLight SourceDual edge CCFL cold cathode fluorescent tubes
Onboard CircuitNo built-in CCFL high-voltage boost IC; external dual-lamp CCFL inverter mandatory
CCFL Rated Lifespan40,000 hours to half brightness
Environmental RatingOperating Temperature-10 ℃ ~ +70 ℃ wide industrial grade
Storage Temperature-30 ℃ ~ +80 ℃
Operating Humidity10% ~ 90% RH non-condensing
Anti-Vibration3.0G industrial vibration standard
Quality & StockQuality GradeOriginal Grade A: zero bright/dark dot, no line mura, uniform backlight without light leakage
Stock StatusIn-Stock; full pixel scan + 4h temp cycling aging test before shipment
ComplianceRoHS compliant, CCFL contains trace mercury
Touch MatchingBare LCM only; separate 5.5" 4-wire resistive touch digitizer for optical bonding

Core Advantages

  1. 750 cd/m² ultra-high sunlight-readable brightness, suitable for semi-outdoor portable field equipment

  2. -10℃ ~ +70℃ wide industrial temperature, stable cold startup in cold workshops & continuous operation in high-temperature closed cabinets

  3. Dual timing switch (QVGA/VGA), flexible matching different equipment UI resolution demands

  4. Built-in UD/LR screen flip control pins, arbitrary rotation adapt vertical/horizontal equipment installation

  5. 40,000-hour long-life dual CCFL backlight, reduce maintenance downtime for 24/7 continuous production equipment

  6. 3.0G anti-vibration aluminum frame, fit construction machinery and vibration-prone portable testers

  7. Mature Japanese NLT industrial display process, ultra-low pixel/mura defect rate for mass maintenance replacement

  8. Ready original spot stock supports fast delivery for machinery repair & small-batch industrial projects

Typical Application Scenarios

  1. Replacement display for CNC lathe, injection molding, textile machinery HMI operation panels

  2. Portable industrial pipeline, environmental, electrical fault diagnostic tester main screen

  3. Mini handheld blood analysis, ECG portable medical measuring equipment parameter display

  4. Construction & agricultural machinery wireless remote control vertical status screen

  5. Small laboratory analytical instruments & data recorder real-time waveform monitor

  6. Spare replacement module for NLT NL3224BC35 series 5.5-inch dual CCFL QVGA industrial TFT LCM

 FAQ

Q1: Does NL3224BC35-22 need an external CCFL inverter?

A1: Yes. No onboard CCFL high voltage boost IC. Matched dual-lamp CCFL high voltage inverter is mandatory to light the backlight; WLED constant current drivers cannot substitute without circuit refitting.

Q2: Can this panel connect LVDS driver boards directly?

A2: No. Native signal is 33Pin parallel RGB TTL CMOS. Dedicated TTL-to-LVDS conversion board is required for signal conversion.

Q3: What two display timing modes does this module support?

A3: Built-in timing select pin, switchable between native QVGA 320×240 and VGA 640×480 resolution.

Q4: Can NL3224BC35-20 directly replace NL3224BC35-22?

A4: Mechanical outline, mounting holes and 33Pin pinout are fully consistent; verify driver timing & CCFL electrical parameters before plug-and-play installation.

Q5: Does the LCM come with touch panel as standard?

A5: Bare LCD module only without touch sensor layer. Separate matched 5.5-inch 4-wire resistive touch digitizer needs optical bonding to form touch industrial HMI assembly.

Q6: Are panels in stock and ready for shipment?

A6: Yes, tested Grade A original NLT modules are warehoused. Shipment within 1–3 working days after order confirmation, every unit completes full pixel and backlight uniformity test before delivery.

Product Comparison
Model:
Size:
Resolution:
Brightness:
Contrast Ratio:
Viewing Angle:
Lamp Type:
Signal Interface:
Panel Type:
NL3224BC35-22 NLT 5.5 inch a-Si TFT-LCD LCM 320(RGB)×240

NL3224BC35-22 NLT 5.5 inch a-Si TFT-LCD LCM 320(RGB)×240

NL3224BC35-22

5.5"
320(RGB)×240, QVGA 72PPI
750 cd/m² (Typ.)
500 : 1 (Typ.) (TM)
55/55/50/40(Typ.)(CR≥10)
2 pcsCCFL, 40K hours, No Driver
CMOS(1ch,6-bit),33pinsConnector
a-Si TFT-LCD, LCM
NL3224AC35-10 5.5 inch 320(RGB)×240 CCFL lcd screen display

NL3224AC35-10 5.5 inch 320(RGB)×240 CCFL lcd screen display

NL3224AC35-10

5.5"
320(RGB)×240
250 cd/m²
85:1
50/50/25/25
1 pcs CCFL
Analog RGB , 24 pins
a-Si TFT-LCD
NL3224AC36-01F NLT 5.7 inch a-Si TFT-LCD  LCM 320(RGB)×240  QVGA  70PPI

NL3224AC36-01F NLT 5.7 inch a-Si TFT-LCD LCM 320(RGB)×240 QVGA 70PPI

NL3224AC36-01F

5.7"
320(RGB)×240, QVGA 70PPI
800 cd/m² (Typ.)
900:1 (Typ.) (TM)
SupportColor
WLED, 50K hours , With LED Driver
CMOS(1ch,6-bit)33pinsConnector
a-Si TFT-LCD, LCM
NL3224AC36-01D NLT 5.7 inch a-Si TFT-LCD  LCM 320(RGB)×240  QVGA  70PPI

NL3224AC36-01D NLT 5.7 inch a-Si TFT-LCD LCM 320(RGB)×240 QVGA 70PPI

NL3224AC36-01D

5.7"
320(RGB)×240, QVGA 70PPI
500 cd/m² (Typ.)
900:1 (Typ.) (TM)
80/80/80/80(Typ.)(CR≥10)
WLED, 50K hours, With LED Driver
CMOS(1ch,6-bit),33pinsConnector
a-Si TFT-LCD, LCM
NL3224BC35-22 is a 5.5" a-Si TFT-LCD, LCM Display screen Product from NLT.According to NLT's product specification sheet,NL3224BC35-22 display has a resolution of 320(RGB)×240, QVGA 72PPI, Contrast Ratio is 500 : 1 (Typ.) (TM),Viewing Angle is 55/55/50/40(Typ.)(CR≥10),Lamp Type is 2 pcsCCFL, 40K hours, No Driver,Signal Interface is CMOS(1ch,6-bit),33pinsConnector,Brightness is 750 cd/m² (Typ.).Based on its characteristics, this model is recommended for application in Industrial and other products.The weight of NL3224BC35-22 after packaging is 0.500KG.We have made every effort to minimize weighing variances; however, we cannot guarantee absolute accuracy.
why choose us
Questions & Answers
Ask a Question >
Customer Reviews
Write a Review >
Comprehensive Score
4.8 out of 5
10 Reviews
5 star
80%
4 star
20%
3 star
0%
2 star
0%
1 star
0%
Review this Product Order
Share your thoughts with other customers
Write a Review
P************k
Nov 10, 2025
(5/5)
My package arrived at the expected date (6 days after the purchase) and in good condition
O***********E
Sep 29, 2025
(5/5)
Very nice and sharp in the choice
L***********A
Sep 12, 2025
(5/5)
ALL AS PLANNED OK
a****k
Aug 28, 2025
(5/5)
Fast delivery, Comptetive price Excellent support
R********a
Aug 25, 2025
(5/5)
Perfect and easy.
R************z
Aug 21, 2025
(5/5)
Fast shipping, good communication, goods as described, will buy again.
G*************i
Aug 15, 2025
(5/5)
Good price for things hard to find!
y****m
Aug 15, 2025
(5/5)
Product arrived earlier than expected. Price was also very reasonable.
H*******e
Aug 12, 2025
(4/5)
The communication with customer service was very smooth, the logistics speed was also fast, the product was consistent with the description, and it was a good shopping experience.
H******i
Nov 18, 2024
(4/5)
Excellent quality, affordable price, worth recommending
+8618820172049
service@zylcdshop.com