AUO 10.5" LCD Panel C105EAT01.0

All Categories

Decoding the Part Number: C105EAT01.0

The part number C105EAT01.0 follows AUO's internal naming convention, which encodes key information. The "C105" typically denotes a 10.5-inch diagonal screen size. The following letters and numbers often reference the panel's resolution, technology generation, and revision. In this case, it is widely recognized as a 10.5-inch panel with a Full HD (1920 x 1080) resolution, utilizing IPS (In-Plane Switching) technology for superior viewing angles and color accuracy.

Understanding this nomenclature is the first step in verification. It distinguishes this panel from other 10.5-inch models that may have different resolutions (e.g., 1920x1200) or older TN (Twisted Nematic) technology. The "01.0" suffix usually indicates the initial revision or version of this specific panel design. When sourcing, it is vital to match the entire part number string, as even minor variations can signify differences in backlight type, connector placement, or firmware that affect physical and electrical compatibility.

Technical Specifications and Performance Profile

At its core, the C105EAT01.0 is a high-performance LCD module. Its primary specification is a 1920 x 1080 pixel resolution at a 16:9 aspect ratio, delivering sharp and detailed imagery. The use of IPS technology is a significant feature, providing wide viewing angles—often up to 178 degrees horizontally and vertically—with minimal color shift and distortion when viewed off-axis.

Other critical technical parameters include its brightness, typically in the range of 300 to 500 nits, making it suitable for various lighting conditions. The color gamut coverage (e.g., sRGB or NTSC) defines its color reproduction capability. The panel interface is almost certainly LVDS (Low-Voltage Differential Signaling), a standard for transmitting high-speed video data. The exact pin configuration, voltage requirements, and backlight driver details (e.g., LED array configuration) are contained within the panel's datasheet, which is the ultimate authority for integration.

Primary Applications and Use Cases

The combination of a moderate size, high resolution, and robust IPS technology makes the C105EAT01.0 a versatile component. It is not commonly found in mass-market consumer laptops but is frequently designed into specialized and high-reliability equipment.

Typical applications include medical diagnostic displays, where color accuracy and viewing consistency are critical; industrial human-machine interface (HMI) panels and control systems; embedded systems in aviation or transportation; and high-end commercial tablets or portable monitors. Its specifications balance performance with power consumption and physical dimensions, making it a preferred choice for OEMs (Original Equipment Manufacturers) in these sectors where durability and visual clarity are prioritized over lowest cost.

Sourcing Challenges and Authenticity Verification

Sourcing a genuine C105EAT01.0 panel can be challenging. As an AUO original part, it may be distributed through authorized channels, but many available units are salvaged from end-of-life equipment or sourced from independent distributors. Key challenges include ensuring panel grade (A+ vs. A- with possible pixel defects), verifying the condition of the backlight (no yellowing or dimming), and confirming the physical integrity (no cracks, pressure marks, or delamination).

Authenticity verification involves checking the AUO label on the rear metal shield for the exact part number and lot code. Purchasers should request clear photos of the actual item, not stock images. Reputable suppliers will provide this and may offer testing reports. Beware of significantly lower prices, which often indicate compatible panels (similar specs but different model) or refurbished units with potential reliability issues.

Compatibility and Integration Considerations

Replacing or integrating this panel is not a simple plug-and-play exercise if the host device was originally designed for it. Physical compatibilityis the first hurdle: the exact dimensions, mounting hole positions, and bezel clearance must match. Next is connector compatibility—the LVDS connector type (e.g., 30-pin, 40-pin), its pitch, and pinout arrangement must be identical.

Finally, and most crucially, is signal compatibility. The LVDS signal format (e.g., JEIDA vs. VESA), timing parameters, and backlight control scheme (PWM dimming voltage and frequency) must align with the host system's controller board. Using an incompatible panel can result in no display, distorted image, flickering, or permanent damage. Consulting the original device's service manual and both the panel and controller board datasheets is non-negotiable for a successful integration.

Alternatives and Cross-Reference Options

If the genuine C105EAT01.0 is unavailable or cost-prohibitive, identifying a compatible alternative is a complex but sometimes necessary task. This involves finding a panel with identical physical dimensions, mounting, connector pinout, and electrical interface. Some panels may share a "compatible" designation (e.g., a model number ending with similar letters).

However, true drop-in replacements are rare. More often, a controller board adapter or a universal LCD controller kit may be required to translate signals between the host and a different panel. This adds complexity and cost. Cross-referencing should be done using professional panel databases, and any alternative must be rigorously tested for all parameters—not just initial power-on—before final installation.

FAQs: C105EAT01.0 LCD Panel

1. What is the C105EAT01.0?It is a 10.5-inch Full HD (1920x1080) IPS LCD panel manufactured by AU Optronics.

2. What is its screen resolution?The resolution is 1920 pixels horizontally by 1080 pixels vertically (Full HD).

3. What does "IPS" mean for this panel?IPS (In-Plane Switching) technology provides wide viewing angles and better color consistency compared to older TN panels.

4. What type of interface does it use?It uses an LVDS (Low-Voltage Differential Signaling) interface for video data transmission.

5. Where is this panel commonly used?Common in medical devices, industrial HMIs, embedded systems, and high-end portable displays.

6. How can I verify I have a genuine AUO panel?Check for the official AUO label on the back with the exact part number and lot code.

7. Can I use a different 10.5" 1080p panel as a replacement?Not directly. Physical dimensions, connector, pinout, and signal timing must match exactly for a drop-in replacement.

8. What are the main risks when sourcing this panel?Risks include receiving a used/refurbished unit, a lower-grade panel with defects, or an incompatible "compatible" model.

9. Is the backlight LED?Yes, modern panels like this use an LED backlight system for illumination.

10. What should I do if I can't find the original panel?Investigate verified compatible alternatives using panel databases or consider using a universal LCD controller board with a similar spec panel.

Conclusion

The AUO C105EAT01.0 LCD panel exemplifies the precision engineering required in specialized display applications. Successfully working with this component demands a methodical approach that moves far beyond a simple part number search. It requires a firm grasp of its technical specifications, a clear understanding of its integration parameters, and a cautious strategy for sourcing and verification.

By appreciating the importance of physical, connector, and signal compatibility, and by rigorously verifying authenticity and condition, integrators and repair professionals can ensure reliable performance and avoid costly mistakes. Whether restoring critical equipment or building a custom solution, treating the C105EAT01.0 with the technical depth it warrants is the key to a successful project outcome.