Mitsubishi AA106TA01-DE1 10.6" Industrial LCD Display Panel 1280×768

Product Overview

The AA106TA01-DE1 is a 10.6" industrial LCD display panel manufactured by Mitsubishi, featuring 240x400 resolution with WLED backlight and LVDS interface. With 150 cd/m² brightness and 80:1 contrast ratio, viewing angle 88/88/88/88, supporting 65K/262K/16.7M colors, designed for handheld devices and embedded display applications.

Specifications

Applications

Handheld devices

Embedded systems displays

Portable instruments

Wearable devices

Point-of-sale terminals

Small appliance displays

FAQ:

Q1: What are the typical power supply voltage and LVDS configuration requirements for driving the Mitsubishi AA106TA01-DE1?
A1: The logic power supply voltage for this panel is typically 3.3V. The LVDS input generally supports 6-bit (single-channel) or 8-bit color depth. When configuring the driver board, you must ensure that the output LVDS signal format, clock frequency, and bit depth from the control board strictly match the panel’s datasheet; otherwise, you may experience a scrambled display or the panel not lighting up at all.

Q2: What are the physical mounting dimensions and viewing angle characteristics of the AA106TA01-DE1?
A2: This 10.6-inch panel is a compact industrial display; the exact length, width, and mounting holes must be verified with the official mechanical drawing (the physical bezel is typically similar to a 16:10 ratio, as the display itself is 15:9). Regarding viewing angles, industrial-grade panels usually utilize wide-viewing-angle technologies like IPS or MVA, achieving horizontal/vertical viewing angles of 160° or wider to meet multi-angle observation needs.

Q3: How does the AA106TA01-DE1 perform in terms of vibration resistance and wide temperature operation in industrial environments?
A3: As a Mitsubishi industrial-grade panel, the AA106TA01-DE1 is designed to withstand certain levels of mechanical vibration and shock, with reinforced component soldering and structural integrity. Its operating temperature range typically covers 0°C to 50°C (some industrial panels can reach -20°C to 70°C), making it suitable for harsh factory floor environments.

Q4: What specifications of LVDS cable should be matched when powering on the AA106TA01-DE1?
A4: You need to select the corresponding LVDS cable based on the connector model on the back of the panel. You must ensure that the pin definitions of the cable (such as power, ground, and differential signal pairs) match the panel pins exactly. Additionally, the cable impedance is generally required to be 100 ohms to ensure high-speed signal integrity and reduce electromagnetic interference (EMI).