Recently Viewed
LTA104D183F Toshiba Panasonic 10.4-inch LCD Display LCD Module
LTA104D183F is mature Toshiba-Panasonic co-developed 10.4-inch LTPS SVGA industrial TFT module, mass pre-installed on medium-sized automation equipment operation panels and desktop laboratory monitoring instruments.
320 cd/m² high standard brightness ensures clear display under factory overhead workshop lighting, no extra shading hood required. Classic 4:3 SVGA high vertical pixel layout can display dozens of rows of equipment parameter tables, long real-time production trend curves and fault alarm text without frequent vertical scrolling. LTPS technology brings lower static power consumption, extending continuous working time of semi-portable testing devices.
Full Technical Specification Table
| Category | Parameter | Typical Specification |
|---|---|---|
| Basic Info | Full Part Number | LTA104D183F |
| Manufacturer | Toshiba Matsushita (TMD Japan LTPS Industrial Series) | |
| Screen Size | 10.4 inch, landscape 4:3 | |
| Display Core | Native Resolution | 800(RGB) × 600 SVGA, 96 PPI |
| Panel Tech | LTPS a-Si TN TFT-LCD, Transmissive Normally White | |
| Pixel Arrangement | RGB vertical stripe | |
| Optical Performance | Active Display Area (AA) | 211.2(W) × 158.4(H) mm |
| Pixel Pitch | 0.264 × 0.264 mm | |
| Typical Brightness | 320 cd/m² industrial high brightness | |
| Static Contrast Ratio | 450:1 @ 25℃ ambient | |
| Color Depth | 6-bit RGB, total 262K display colors, 48% NTSC gamut | |
| Viewing Angle (CR≥10) | L/R:60°, U:50°, D:50°; Optimal viewing: 6 o’clock (bottom) | |
| Response Time (Tr/Td) | 8ms / 17ms, total 25ms typical | |
| Native Refresh Rate | Fixed 60Hz SVGA timing | |
| Mechanical Spec | Overall Outline Dimension | 242.0(W) × 178.45(H) × 15.4(D) mm aluminum metal frame |
| Net Weight | ~760g industrial module | |
| Surface Treatment | Standard glossy polarizer, matte AG anti-glare optional, 3H scratch-resistant hard coat | |
| Electrical Interface | LVDS Connector | 20Pin 0.5mm pitch single-channel 6-bit LVDS FPC |
| Logic Supply Voltage | DC 3.3V (3.0V ~ 3.6V tolerance) | |
| Backlight System | Light Source | Dual edge straight CCFL cold cathode tubes (2 lamps) |
| Backlight Harness | Independent 2Pin small separate wire harness for lamp power input | |
| Onboard Circuit | No built-in CCFL high-voltage boost IC; external dual-lamp CCFL inverter mandatory | |
| CCFL Rated Lifespan | 50,000 hours to half brightness, detachable replaceable lamp structure | |
| Environmental Rating | Operating Temperature | 0 ℃ ~ +50 ℃ light industrial grade |
| Storage Temperature | -20 ℃ ~ +60 ℃ | |
| Operating Humidity | 10% ~ 90% RH non-condensing | |
| Quality & Compliance | Quality Grade | Original Grade A: zero bright/dark dot, no horizontal/vertical line mura, uniform backlight without light leakage |
| Stock Status | In-Stock; full pixel scan + wide temp cycling aging test before shipment | |
| Certification | RoHS compliant, UL certified, CCFL contains trace mercury | |
| Touch Matching | Bare LCM only; separate 10.4" 4-wire resistive touch digitizer for optical bonding |
LTPS low-temperature polycrystalline silicon technology, lower power consumption than conventional a-Si industrial screens
320 cd/m² high industrial brightness, readable under bright indoor factory lighting
Detachable dual CCFL lamp structure, low post-maintenance cost when backlight lamp aging
Classic 4:3 SVGA 800×600 resolution, ultra-high compatibility with vintage industrial control firmware
Compact 20Pin single-channel LVDS interface, abundant industrial monitor & PLC driver matching resources
50,000-hour long-life dual CCFL backlight, reduce maintenance downtime for 24/7 uninterrupted production equipment
Japan original Toshiba Matsushita industrial production process, ultra-low pixel/mura defect rate for bulk machinery maintenance orders
Ready original surplus spot stock supports fast delivery for old industrial equipment urgent repair orders
Replacement SVGA display for 10.4-inch vintage CNC lathe, injection molding, textile machinery operation HMI panels
Portable medical blood/ECG analytical equipment real-time parameter & waveform monitoring screen
Mini laboratory precision analytical instrument long-period data recorder display terminal
Factory automation central control cabinet auxiliary equipment status monitoring panel
Early-generation compact embedded industrial all-in-one machine fixed cabinet data display screen
Spare replacement module for Toshiba LTA104D18X series 10.4-inch dual CCFL LTPS SVGA industrial TFT LCM
