Recently Viewed
LTA084C270F Toshiba 8.4 inch 800*600 tft lcd module
LTA084C270F is an 8.4-inch industrial grade LCD module product launched by Toshiba Matsushita Display using LTPS TFT-LCD technology, designed for industrial automation and embedded applications. This display is equipped with a 2-piece CCFL edge-lit backlight system (without driver) and adopts TN display technology, featuring normally white display and transmissive characteristics. It can provide 450:1 typical transmissive contrast ratio and 400cd/m² high brightness, with the best viewing angle being 6 o'clock. The product uses a 20-pin single-channel LVDS (6-bit) interface, with 17ms fast response time, complying with RoHS environmental standards. Mass produced in 2007, currently discontinued but still available in stock.
LTA084C270F Toshiba tft lcd module Highlights:
High Brightness Display: 400cd/m² high brightness, clear display even in well-lit industrial environments
Wide Temperature Operating Range: -20°C~+70°C operating temperature range, adapts to various extreme temperature environments
Long Life Backlight System: 2-piece CCFL backlight design, 50,000 hours typical backlight life, reducing maintenance frequency and cost
Fast Response Performance: 17ms fast response time, no obvious smearing, suitable for displaying dynamic content and industrial monitoring screens
Stable and Reliable Performance: Manufactured by Toshiba with strict industrial grade quality control standards, ensuring long-term stable operation
Standard Interface Design: 20-pin standard LVDS interface, easy to integrate and replace, good compatibility
LTA084C270F Toshiba tft lcd module Specifications:
| Parameter Category | Detailed Specifications |
|---|---|
| Brand | Toshiba Matsushita Display |
| Model Number | LTA084C270F |
| Screen Size | 8.4 inches |
| Panel Type | LTPS TFT-LCD, TN Mode |
| Resolution | 800(RGB)×600, SVGA, 119PPI |
| Pixel Configuration | RGB Vertical Stripe |
| Pixel Pitch | 0.213×0.213mm(H×V) |
| Aspect Ratio | 4:3 |
| Active Area | 170.4(W)×127.8(H)mm |
| Bezel Area | 174.8(W)×132.2(H)mm |
| Outline Dimension | 199.5(W)×149.5(H)×11.5(D)mm |
| Contrast Ratio | 450:1 (Typical) |
| Brightness | 400cd/m² (Typical) |
| Viewing Angle | 60/60/50/50 (CR≥10) |
| Best Viewing Angle | 6 O'clock |
| Display Colors | 262K Colors (6-bit) |
| Response Time | 17ms (Tr+Td, Typical) |
| Refresh Rate | 60Hz |
| Backlight Type | CCFL White, 2 Pieces, Edge-lit, Without Driver |
| Backlight Life | 50,000 Hours (Typical) |
| Interface Type | LVDS (1 Channel, 6-bit) |
| Connector Pins | 20 Pins |
| Driving Voltage | 3.3V (Typical) |
| Typical Power Consumption | 5.9W |
| Display Mode | Normally White, Transmissive |
| Operating Temperature | -20°C ~ +70°C |
| Storage Temperature | -30°C ~ +80°C |
| Weight | Approximately 460g |
| RoHS Compliance | Yes |
| Production Status | Discontinued (Still in Stock) |
Industrial Automation: CNC machine control panels, PLC HMIs, industrial robot teach pendants, process monitoring equipment
Medical Equipment: Portable medical instruments, medical diagnostic equipment, operating room monitoring devices, laboratory analysis instruments
Test and Measurement: Oscilloscopes, signal generators, spectrum analyzers, data acquisition equipment
Automotive Electronics: Engineering vehicle displays, special vehicle navigation systems, in-vehicle infotainment systems
Others: Industrial computers, security monitoring equipment, communication devices, financial terminals
FAQ:
Q1: Does LTA084C270F have touch function?
A1: This product is a pure LCD display module and does not include touch function. If you need a touch assembly, you can choose the matching resistive or capacitive touch assembly version.
Q2: Can this screen be upgraded to LED backlight?
A2: Yes. There are special LED backlight upgrade kits designed for LTA084C270F on the market, easy to install. LED backlight life can reach more than 100,000 hours while reducing power consumption.
Q3: How long is the product warranty?
A3: We provide a 6-month warranty service. Product quality problems caused by non-human damage can be replaced free of charge during the warranty period.
