Recently Viewed
LM156LF1L02 PANDA 15.6 Inch Low Force Touch Panel LCD Module
| Parameter | Technical Spec |
|---|---|
| Model Number | LM156LF1L02 (Internal code NCP000B) |
| Manufacturer | PANDA (CEC Nanjing Panda) |
| Diagonal Size | 15.6 inches |
| Native Resolution | 1920 × 1080 FHD, 16:9, 141 PPI |
| LCD Technology | IGZO Oxide FFS, Transmissive, Normally Black |
| Pixel Arrangement | RGB Vertical Stripe |
| Color Performance | 6-bit + FRC, 262K colors, 45% NTSC gamut |
| Signal Interface | 2-lane eDP 1.2, 30Pin bottom FPC, 3.3V logic |
| Backlight | Edge WLED, integrated onboard LED driver circuit |
| Backlight Lifespan | 10,000 hours typical |
| Typical Brightness | 250 cd/m² |
| Typical Contrast Ratio | 1000:1 |
| Viewing Angle (CR≥10, L/R/U/D) | 89° / 89° / 89° / 89° full symmetric wide angle |
| Total Response Time (Tr+Tf) | 25 ms typical |
| Refresh Rate | 60 Hz |
| Pixel Pitch | 0.17925 × 0.17925 mm |
| Active Display Area (AA) | 344.16 mm (W) × 193.59 mm (H) |
| Overall Outline Dimension | 359.5 mm (W) × 223.8 mm (H) × 3.2 mm ultra-slim |
| Net Weight | ~342 g lightweight |
| Surface Polarizer | Matte anti-glare, 3H hard scratch-resistant coating |
| Operating Temperature | 0 ℃ ~ +50 ℃ |
| Storage Temperature | -20 ℃ ~ +60 ℃ |
| Original Touch Configuration | Bare panel without touch sensor |
| Touch Upgrade Option | Compatible bonding with low-force capacitive touch film (low trigger pressure touch assembly) |
| Compliance | RoHS, REACH certified |
| Product Status | Mass production standard slim panel, A-grade new stock for laptop, embedded industrial touch display assembly |
Full symmetric FFS ultra-wide viewing angle: Consistent color from all directions, suitable for shared workstation
Ultra-slim lightweight form factor: Only 3.2mm thickness, easy touch film bonding without excessive overall thickness increase
Low-power IGZO oxide panel: Lower power consumption, longer battery life for portable equipment
Integrated WLED driver: No separate LED power board required, simpler touch assembly system design
Matte 3H hard coating: Wear-resistant, anti-reflection for workshop frequent operation
Touch-upgradable base panel: Perfect matching with low-force capacitive touch film to build low-pressure touch display modules
Slim industrial touch HMI compact control all-in-one (after bonding low-force touch film)
Portable industrial testing analyzers, field maintenance notebooks
Light medical portable diagnostic touch auxiliary display equipment
Commercial slim laptops, industrial rugged portable computers
Indoor industrial self-service kiosks, logistics monitoring touch terminals
Machine vision high-definition touch display equipment
Replacement bare screen for customized 15.6-inch low-force touch integrated display modules
