Recently Viewed
KCS6448JSTT-X6 Kyocera 10.4 inch 640×480 lcd display panel
Model: KCS6448JSTT-X6
Manufacturer: Kyocera (Japan)
Size: 10.4 inch, Landscape, 4:3 Aspect Ratio
Native Resolution: 640(RGB) × 480 VGA
Display Technology: CSTN-LCD, Normally Black, Transmissive Color
Signal Interface: 31Pin 8-bit Parallel RGB Data Interface
Backlight: Single U-shaped CCFL lamp, No onboard CCFL inverter; external high voltage inverter required
Touch Configuration: Bare LCD module without touch sensor
Related Revision: KCS6448JSTT-X4 (mechanical compatible, minor timing difference)
| Classification | Standard Parameter |
|---|---|
| Basic Display Spec | Diagonal: 10.4"Resolution: 640 × 480 VGAActive Area (AA): 211.2(W) × 158.4(H) mmPixel Pitch: 0.330 × 0.330 mmPixel Arrangement: Vertical RGB stripeDisplay Mode: CSTN Normally Black Transmissive |
| Mechanical Dimension | Outline: 242.5(W) × 179.0(H) × 7.5(D) mmSurface: Matte anti-glare polarizerNet Weight: ~400gMetal integrated frame |
| Optical Performance | Typical Brightness: 100 cd/m²Contrast Ratio: 25:1 (Typ.)Viewing Angle(CR≥2): L/R 50°, U 30°, D 30°Color Depth: 262K colorsResponse Time (Tr/Td): 160/80 ms typicalNative Refresh Rate: 75Hz |
| Electrical Parameter | Logic Supply Voltage: DC 3.3V / 5.0V SelectableSignal Level: CMOS parallel signalConnector: 31Pin board-to-board connectorTypical Power Consumption: ≈3.8W |
| Backlight System | Light Source: 1pcs U-type CCFL tubeLamp Service Life: ≥40,000 hours to half brightnessControl: Analog dimming |
| Environmental Grade | Operating Temperature: 0 ℃ ~ +40 ℃ Standard Industrial GradeStorage Temperature: -20 ℃ ~ +60 ℃Humidity: 10%~85% RH, non-condensing |
| Certification | RoHS compliant |
Power pins: VDD 3.3V/5V, multiple GND shielding pins
8-bit RGB parallel data bus
Timing signals: Hsync, Vsync, CLK, DE
LCD hardware reset pin (Active Low)
Backlight enable & analog dimming control pins
Classic Kyocera original Japanese CSTN color module, widely used on legacy Japanese industrial equipment
Ultra-thin module thickness only 7.5mm, suitable for slim embedded control panels
Matte surface effectively suppress ambient light reflection for workshop operation
Mature single CCFL backlight scheme, stable long-term continuous operation
Standard parallel RGB interface, matched with many old industrial controller drive boards
Mainstream replacement screen for aging original industrial displays
Old CNC machine tools, injection molding machinery industrial control operation panel replacement
Legacy factory automation HMI, testing and measuring instruments
Printing, textile machinery original display maintenance refurbishment
Laboratory analytical equipment, old medical auxiliary monitoring terminals
Industrial equipment spare screen replacement project
Power Requirement: Support DC3.3V / 5V logic power; confirm drive board voltage before power on
Backlight Notice: Only support CCFL circuit. Must use matching single lamp CCFL inverter; WLED driver cannot be adapted directly
Version Distinction: X4 and X6 share identical mechanical dimension, but signal timing parameters differ; drive board adjustment required for cross replacement
Touch Customization: Standard delivery only LCD module. 4-wire resistive touch can be bonded by OCA on request
Connector Handling: Avoid repeated plugging and pulling of the 31Pin connector to prevent poor contact
Viewing Restriction: CSTN limited viewing angle; install according to equipment operator viewing direction
