Recently Viewed
CLAN050WA41 2XE CPT 5 inch 720*1280 a-Si TFT-LCD CELL
The CLAN050WA41 2XE (Aliases: CLAN050WA4L 2XE, C1AN050WA41 2XE) is a genuine 5.0-inch a-Si TFT-LCD CELL (bare panel) manufactured by Chunghwa Picture Tubes (CPT), Taiwan. It is a classic model of the CLAN050WA41 series. Unlike traditional LCM modules, CELL only includes the liquid crystal display unit, without backlight module and driver board, designed specifically for customers with customized backlight, driver and touch requirements, and is widely used in smartphones, tablets and industrial handheld devices.
Adopting CPT's exclusive HFFS (High Fringe Field Switching) wide viewing angle display technology, it features 720(RGB)×1280 WXGA high resolution with 294 PPI pixel density, supports 16.7M true color display, and presents clear, delicate and colorful picture effects. This CELL boasts an 800:1 typical contrast ratio and 85/85/85/85° all-direction viewing angles (CR≥10), ensuring consistent color and brightness from any perspective.
The surface is treated with a hard coating to effectively protect the liquid crystal glass from scratches. With a total thickness of only 0.625mm, it adopts an ultra-thin glass design of 0.20mm each on the top and bottom, suitable for integration into thin and light devices. With an operating temperature range of -20°C to 70°C and a storage temperature range of -30°C to 80°C, it can adapt to the temperature requirements of most consumer electronics and industrial application scenarios. This product is a brand new original genuine product, which has passed strict quality inspection, complies with RoHS environmental standards, and is in stock in large quantities.
CLAN050WA41 2XE CPT 5.0" TFT-LCD CELL Detailed Specification:
| Parameter Category | Detailed Specification |
|---|---|
| Brand | Chunghwa Picture Tubes (CPT) |
| Model | CLAN050WA41 2XE (Aliases: CLAN050WA4L 2XE, C1AN050WA41 2XE) |
| Panel Size | 5.0 inch |
| Panel Type | a-Si TFT-LCD, CELL (Full Cell) |
| Display Technology | HFFS |
| Resolution | 720(RGB)×1280 (WXGA) |
| Pixel Density | 294 PPI |
| Pixel Format | RGB Vertical Stripe |
| Aspect Ratio | 9:16 (H:V) |
| Dot Pitch | 0.02875×0.08625 mm (H×V) |
| Pixel Pitch | 0.08625×0.08625 mm (H×V) |
| Active Area | 62.1(W)×110.4(H) mm |
| Outline Dimension | 65.1(W)×117.9(H) mm |
| Total Thickness | 0.625±0.045 mm (Typical) |
| Glass Thickness | 0.20+0.20 mm (0.20mm each on top and bottom) |
| Display Mode | HFFS, Normally Black, Transmissive |
| Contrast Ratio | 800:1 (Typical, Transmission) |
| Viewing Angle | 85/85/85/85° (L/R/U/D, CR≥10) |
| Display Colors | 16.7M colors (8-bit) |
| Response Time | 30 ms (Typical, Tr+Td) |
| Refresh Rate | 60 Hz |
| Backlight Type | No Backlight (Customer needs to match separately) |
| Surface Treatment | Hard Coating |
| Signal Interface | None (Customer needs to bond driver IC separately) |
| Operating Temperature | -20℃ ~ 70℃ |
| Storage Temperature | -30℃ ~ 80℃ |
| Environmental Standard | RoHS Compliant |
| Touch Screen | None (Customizable bonded RTP/CTP) |
| Product Status | Brand New Original Genuine, In Stock |
Consumer Electronics: Smartphones, tablets, portable multimedia players, electronic dictionaries, digital cameras
Industrial Handheld Terminals: Industrial PDAs, data collectors, handheld scanners, portable detectors, logistics barcode scanners
Medical Equipment: Portable medical instruments, blood glucose meters, blood pressure monitors, infusion pump displays, diagnostic equipment auxiliary panels
Automotive & Transportation: Car dash cams, portable navigators, motorcycle dashboards, electric vehicle displays
Customized Display Solutions: Customized display projects requiring special backlight brightness, special driver interfaces or special touch functions
FAQ:
Q1: What is the difference between CELL and LCM?
A1: CELL (liquid crystal glass/bare panel) only includes the liquid crystal display unit, without backlight module, driver board and FPC interface; LCM (liquid crystal module) is a complete display module that integrates CELL, backlight, driver board and interface. CELL is suitable for customers with customized requirements, who can match different backlight, driver and touch solutions according to their own product design; LCM is a plug-and-play standard product, suitable for rapid integration.
Q2: What accessories do I need to purchase additionally to make CLAN050WA41 2XE CELL display normally?
A2: You need to match the following accessories by yourself:
Driver IC (needs to be bonded to the CELL)
FPC flexible circuit board
Backlight module (WLED or CCFL)
Driver board (selected according to interface requirements)
Touch screen (if touch function is required)
We can provide recommendations for related accessories and technical support to help you complete the design of the entire display system.
Q3: What is the difference between CLAN050WA41 2XE and CLAN050WA41 1XE?
A3: The core parameters of the two are basically the same, the main difference lies in the production batch and process optimization. CLAN050WA41 2XE is a newer production batch with slightly improved yield rate and long-term stability, and can directly replace 1XE.
