Recently Viewed
AT070TN01 V. 2 Innolux 10.1 inch 1280(RGB)×800 CCFL backlight LCD screen
AT070TN01 V.2 is a 7.0-inch classic industrial-grade a-Si TFT-LCD display panel manufactured by Innolux (formerly Chi Mei Optoelectronics). As an early mainstream small-to-medium size product launched by Innolux, this model has been widely used in portable consumer electronics and industrial embedded fields due to its mature and stable performance and high cost-effectiveness, and is still the first choice for upgrading and replacing many old devices.
This product adopts TN-type transmissive display technology, providing 480×234 WQVGA standard resolution and 76PPI pixel density, equipped with a 26-pin FPC analog RGB signal interface and 1 CCFL cold cathode backlight, specifically designed for portable and embedded applications that require cost-effectiveness, stability and wide temperature adaptability.
AT070TN01 V. 2 Innolux LCD screen Highlights:
Classic and Mature Industrial Design: Verified by more than ten years of market experience, with extremely high product stability and reliability, and is the standard configuration for many industrial and consumer electronic devices
Good CCFL Backlight Uniformity: Traditional CCFL backlight has better color uniformity and display consistency compared with early LED backlights, suitable for applications that do not require high color but require high stability
Industrial-grade Wide Temperature Design: Supports -20℃ to +70℃ ultra-wide operating temperature range, operating stably even in extreme low and high temperature environments
Good Analog RGB Interface Compatibility: 26-pin analog RGB interface is the standard interface for early small-to-medium size screens, with a large number of mature driving solutions worldwide
Anti-glare Surface Treatment: Matte treatment effectively reduces ambient light reflection and improves readability in indoor and semi-outdoor environments
High Cost-effectiveness: Obvious price advantage compared with new LED backlight products of the same size, especially suitable for low-cost upgrade and replacement of old equipment
Low Power Design: Overall power consumption is only about 5W, suitable for battery-powered portable devices
Mature Supply Chain: Sufficient inventory and alternative resources worldwide, with stable supply
AT070TN01 V. 2 Innolux LCD screen Specification:
| Parameter | Specification |
|---|---|
| Model Number | AT070TN01 V.2 (Alias: AT070TN0L V.2) |
| Manufacturer | Innolux (formerly Chi Mei Optoelectronics) |
| Screen Size | 7.0 inch (diagonal) |
| Panel Type | a-Si TFT-LCD LCM (Liquid Crystal Display Module) |
| Display Mode | TN, Normally White, Transmissive |
| Display Colors | Full Color (262K, 6-bit) |
| Resolution | 480(RGB)×234 pixels (WQVGA) |
| Pixel Arrangement | RGB Vertical Stripe |
| Pixel Pitch | 0.321×0.370mm |
| Pixel Density | 76PPI |
| Active Area | 154.08(W)×86.58(H)mm |
| Outline Dimension | 164.9(W)×100.0(H)×6.0(D)mm |
| Bezel Opening | 156.5(W)×89.0(H)mm |
| Aspect Ratio | 16:9 |
| Brightness | 250 cd/m² (Typ.) |
| Contrast Ratio | 300:1 (Typ., Transmissive) |
| Best Viewing Direction | 4:30 o'clock |
| Viewing Angle | 60°/60°/40°/60° (CR≥10, L/R/U/D) |
| Response Time | 15/20ms (Tr/Td, Typ.) |
| Refresh Rate | 60Hz |
| Backlight Type | CCFL Cold Cathode Fluorescent Lamp, 1 piece |
| Backlight Life | 10,000 hours (Typ.) |
| Backlight Driver | No built-in driver |
| Signal Interface | Analog RGB, 26-pin FPC, 0.5mm pitch |
| Input Voltage | 5.0V(VCC)/5.0V(AVDD)/15.0V(VGH)/-10.0V(VGL) |
| Surface Treatment | Anti-glare (Matte) |
| Touchscreen | None (Resistive customizable) |
| Net Weight | Approx. 160g |
| Condition | Some versions discontinued (compatible alternatives available) |
| Application Grade | Industrial/Consumer Grade |
| Operating Temperature | -20℃ to +70℃ |
| Storage Temperature | -30℃ to +80℃ |
AT070TN01 V. 2 Innolux LCD screen Applications:
Portable Consumer Electronics
Portable DVD players
Digital photo frames
Portable media players
In-car rear entertainment systems
Portable game consoles
Small industrial Human-Machine Interfaces (HMI)
Embedded device displays
Smart meters
Test and measurement instruments
Security monitoring equipment
FAQ:
Q1: Is AT070TN01 V.2 7-inch or 10.1-inch?
A1: AT070TN01 V.2 is a 7.0-inch 480×234 resolution product. The "10.1-inch 1280×800" you mentioned may be a model confusion. For this specification, please refer to Innolux HJ101NA series products.
Q2: Is the AT070TN01 V.2 an original Innolux product?
A2: Yes, all AT070TN01 V.2 we sell are 100% original brand new Grade A products from Innolux factory, with original factory quality guarantee and relevant certification documents.
Q3: Does the product require a separate backlight driver board?
A3: Yes, AT070TN01 V.2 does not include a built-in backlight driver and requires an external CCFL backlight driver board. We can provide matching backlight driver boards and connecting cables.
Q4: If AT070TN01 V.2 is discontinued, what replacement models are available?
A4: We can provide Innolux AT070TN02, AT070TN03 and other upgraded replacement models, as well as 100% compatible alternative solutions from other brands to ensure seamless replacement.
Q5: Can you provide a version with touchscreen?
A5: Yes, customized versions integrated with 4-wire resistive touchscreen are available with a lead time of approximately 2-3 weeks.
