Model: LQ201U1LW22
Manufacturer: Sharp Corporation
Size: 20.1 inch, Landscape, 4:3 Aspect Ratio
Native Resolution: 1600(RGB) × 1200 UXGA, 99 PPI
Display Technology: ASV TFT-LCD, Normally Black, Transmissive
Signal Interface: 30Pin Dual-channel 8-bit LVDS
Backlight: Edge-type 6 pcs CCFL, No onboard CCFL inverter; external high voltage inverter required
Touch Configuration: Bare LCD panel without touch sensor
Related Versions: LQ201U1LW21, LQ201U1LW31 (mechanical compatible with partial timing difference)
| Classification | Standard Parameter |
|---|---|
| Basic Display Spec | Diagonal: 20.1"Resolution: 1600 × 1200 UXGAAspect Ratio: 4:3Active View Area: 408.0(W) × 306.0(H) mmPixel Pitch: 0.255 × 0.255 mmPixel Arrangement: Vertical RGB stripeDisplay Mode: ASV Normally Black Transmissive |
| Mechanical Dimension | Outline: 432.0(W) × 331.5(H) × 25.5(D) mmSurface: AG Anti-Glare polarizer, 3H hard coatingNet Weight: ~3.2 kgAluminum frame with mounting holes |
| Optical Performance | Typical Brightness: 250 cd/m²Contrast Ratio: 500:1 (Typ., TM measurement)Viewing Angle(CR≥10): 88°/88°/88°/88° symmetric wide viewColor Depth: 8-bit, 16.7M colors, 69% NTSCResponse Time (Tr+Td): 20 ms typicalNative Refresh Rate: 60Hz |
| Electrical Parameter | Logic Supply Voltage: DC 12.0VSignal Standard: Dual-channel 8bit LVDSConnector: 30Pin FI-XB series LVDS connectorTypical LCD Power Consumption: ≈16W |
| Backlight System | Light Source: 6 pcs top & bottom edge CCFLLamp Service Life: ≥50,000 hours to half brightnessControl: Analog dimming control |
| Environmental Grade | Operating Temperature: 0 ℃ ~ +50 ℃ Standard GradeStorage Temperature: -25 ℃ ~ +60 ℃Humidity: 10%~85% RH, non-condensing |
| Certification | RoHS, CE |
Power pins: VDD 12V, multiple GND shielding pins
Dual-channel LVDS differential data & clock pairs
I2C EEPROM SDA/SCL pins for display identification
LCD hardware reset pin (Active Low)
Backlight analog dimming & enable signal pins
Sharp proprietary ASV wide viewing angle technology, uniform color reproduction in all directions
Classic 4:3 UXGA resolution, widely adopted for industrial and medical legacy equipment
AG matte surface effectively eliminates ambient light reflection for long-hour monitoring
Stable CCFL backlight architecture, proven long-term reliability for 24/7 continuous operation
Standard dual-channel LVDS interface, compatible with many industrial monitor driver boards
Mature original Sharp industrial panel, sufficient aftermarket inventory for equipment replacement
Industrial automation monitoring displays and industrial control workstations
Medical auxiliary diagnostic display equipment
Legacy 4:3 desktop monitors, security surveillance consoles
Laboratory measuring & analytical instruments
Equipment refurbishment and spare panel replacement projects
Power Requirement: LCD logic requires stable DC12V input; incorrect voltage leads to display failure
Backlight Notice: CCFL backlight only. Must use matched CCFL high voltage inverter; WLED driver cannot be directly adapted
Version Distinction: LQ201U1LW series variants share identical mechanical outline, but signal timing parameters differ; driver board adjustment required before cross replacement
Touch Customization: Standard delivery is bare LCD. Resistive touch overlay can be bonded via OCA upon customer request
Cable Handling: Avoid excessive bending and pulling of LVDS cable to prevent flicker or no-image failure
Operating Restriction: Designed for indoor environment; not suitable for direct outdoor sunlight exposure










