LQ10D367 is a 10.4" a-Si TFT-LCD, LCM Display screen Product from SHARP.According to SHARP's product specification sheet,LQ10D367 display has a resolution of 640(RGB)×480, VGA 76PPI, Contrast Ratio is 100 : 1 (Min.) (TM),Viewing Angle is 70/70/40/70 (Typ.)(CR≥10),Lamp Type is 1 pcs CCFL , 25K hours , No Driver,Signal Interface is Parallel RGB (1 ch, 6-bit) , Connector 31 pins,Brightness is 200 cd/m² (Typ.).Based on its characteristics, this model is recommended for application in Mobile screen and other products.The weight of LQ10D367 after packaging is 1.000KG.We have made every effort to minimize weighing variances; however, we cannot guarantee absolute accuracy.
What do I need to get this LQ10D367 screen working?
A:
To operate this screen, you will need:
A compatible LVDS driver board: This board must support XGA (640x480) resolution and the LVDS signal format specified for the screen.
A suitable power supply: To provide the required operating voltage (e.g., 12V) for both the driver board and the screen's backlight.
A signal source: Such as a computer motherboard or development board, connected to the driver board via an interface like VGA or HDMI.
Q:
My device originally used an LQ10D367. Can I replace it directly with another 10.4-inch screen?
A:
Not necessarily. Even though the size is the same, replacement requires an exact match in resolution, interface type (e.g., LVDS), pinout, voltage, and physical mounting dimensions. It is highly recommended to use the same model for replacement.
Q:
What kind of backlight does this display use, and what is its typical brightness?
A:
The LQ10D367 typically uses an LED backlight, which is long-lasting and energy-efficient. Its typical brightness usually ranges from 200 cd/m², though the exact value may vary by production batch and manufacturer.
Q:
What are the physical dimensions (length, width, thickness) and active area of the LQ10D367 screen?
A:
This screen has a diagonal size of 10.4 inches, with an active area of approximately 211.2(W)×158.4(H) mm. The exact physical dimensions (including the bezel and driver board) should be confirmed with the manufacturer's datasheet.
Q:
What is the resolution and interface type of this LQ10D367 screen?
A:
The LQ10D367 is a 10.4-inch LCD display with a standard resolution of 640x 480 (XGA). It typically uses an LVDS interface for signal transmission.
My package arrived at the expected date (6 days after the purchase) and in good condition
Was This Review Helpful?
0
0
O***********E
Sep 29, 2025
(5/5)
Very nice and sharp in the choice
Was This Review Helpful?
0
0
L***********A
Sep 12, 2025
(5/5)
ALL AS PLANNED OK
Was This Review Helpful?
0
0
a****k
Aug 28, 2025
(5/5)
Fast delivery,
Comptetive price
Excellent support
Was This Review Helpful?
0
0
R********a
Aug 25, 2025
(5/5)
Perfect and easy.
Was This Review Helpful?
0
0
R************z
Aug 21, 2025
(5/5)
Fast shipping, good communication, goods as described, will buy again.
Was This Review Helpful?
0
0
G*************i
Aug 15, 2025
(5/5)
Good price for things hard to find!
Was This Review Helpful?
0
0
S****j
Aug 15, 2025
(5/5)
Product arrived earlier than expected. Price was also very reasonable.
Was This Review Helpful?
0
0
H*******e
Aug 12, 2025
(4/5)
The communication with customer service was very smooth, the logistics speed was also fast, the product was consistent with the description, and it was a good shopping experience.
